Tektronix RSA6100A Series, Help Manual

Page: 252 / 415

GP Digital Modulation > Magnitude Error vs Time Magnitude Error vs Time Display
Item Display element Description
1
Top of graph adjustment Use the knob to adjust the value of the vertical scale.
2 Position
Adjusts the level shown at the bottom of the display.
3 Autoscale button Adjusts the vertical and horizontal settings to provide the best display.
4 Horizontal Position Adjusts the horizontal position of the signal. Units can be either Symbols or
Seconds (Settings > Analysis Time tab > Units).
5
Peak and RMS value readout Displays the Peak value of the magnitude error, the RMS value of the
magnitude error, and the time at which it occurs within the acquisition. Units
can be either Symbols or Seconds (Settings > Analysis Time tab > Units).
6 Horizontal Scale Sets the time spanned by the graph. Units can be either Symbols or Seconds
(Settings > Analysis Time tab > Units).
7 Freq Error Freq Error is the difference between the Center Frequency and the measured
frequency of the signal being tested. This readout will be Freq Offset if the
Freq Offset parameter on the Settings >
Advanced Params (see page 262)
tab is set to Manual.
xxx
Changing Magnitude Error vs Time Display Settings (see page 240)
240
RSA6100A Series Real-Time Spectrum Analyzers Help