Tektronix RSA6100A Series, Help Manual

Page: 255 / 415

GP Digital Modulation > Phase Error vs Time Phase Error vs Time Display
Item Display element Description
1 Freq Error
Freq Error is the difference between the Center Frequency and the measured
frequency of the signal being tested. This readout will be Freq Offset if the
Freq Offset parameter on the Settings >
Advanced Params (see page 262)
tab is set to Manual.
2 Top of graph adjustment Adjusts the phase angle shown at the top of the graph.
3 Position Adjusts the vertical offset.
4 Autoscale Adjusts the vertical and horizontal settings so that the entire trace fi ts in the
graph.
5 Offset Adjusts the horizontal offset.
6 Peak and RMS readouts Displays the Peak value of the phase error and the time at which it occurred.
Also displays the RMS value over the analysis length.
7
Scale Sets the time spanned by the graph.
xxx
Changing the Phase Error vs Time Display Settings (see page 243)
RSA6100A Series Real-Time Spectrum Analyzers Help
243