Tektronix RSA6100A Series, Help Manual

Page: 223 / 415

Pulsed RF > Pulse Statistics Pulse Statistics Display
Item Display element Description
1
Optimized indicator The check mark indicator in the upper, left-hand corner of the display shows
when the Pulse Statistics display is the optimized display.
2 Result Use this list to select which measurement statistics to display. The
measurement chosen here selects the same result to be displayed in the
Pulse Trace display and the Pulse Table display. Selecting a result in any of
these views causes the same result to be selected in all of them.
3 Pulse Selects which pulse’s result is shown. Like the Result, this selection is shared
with the Statistics and Table views.
4
Statistics summary Display of measurement statistics for the selected Result.
5 Vertical range Located at the top of the left graph edge and at the bottom of the left graph
edge, use these controls to adjust the values at the top of the graph and the
bottom of the graph.
6 Plot Selects from Trend, Time Trend, FFT, and Histogram for the graph.
7 Autoscale Set the axes to values that show all trace points.
8 Horizontal offset Adjusting this value moves the graph right or left.
9 Trigger indicator Indicates the trigger point on the pulse train if the trigger occurred during the
time frame of the pulse measurements.
10 Pulse indicator For Trend and Time Trend plot types, this indicates the pulse selected by the
Pulse setting. For the FFT plot type, this indicator marks the trace point at
the selected frequency. For Histogram plot types, this indicator marks the
selected results bin.
11
Scale
Adjusts the horizontal scale.
xxx
Changing the Pulse Statistics Display Settings (see page 211)
RSA6100A Series Real-Time Spectrum Analyzers Help
211