Marker Measurements > Using Markers
Measuring Signal Density, Frequency and Power
on a DPX Bitmap Trace
4.
From the drop-down list, select
Bitmap
.
5.
Click the close control panel button (
) to remove the De
fi
ne Markers control panel.
6.
Touch or click on the MR marker on the trace to activate the marker.
7.
Drag the marker to the desired location on the bitmap.
NOTE.
Markers on the DPX Bitmap trace can be placed on any point in the display, unlike markers
in other displays that can be placed only on a trace. This enables you to measure the signal density,
frequency, and power level at any point on the graph.
Searching for peaks on the DPX bitmap trace.
To locate peaks on the DPX Bitmap trace, use the arrow
buttons on the Marker toolbar. The left / right arrows move the selected marker to the next peak lower
or higher in frequency. The up and down arrows search for peaks at the same frequency. The peaks on
the DPX Bitmap trace are de
fi
ned by the settings for the DPX Signal Density on the Markers > De
fi
ne
Markers >
De
fi
ne Peaks (see page 285)
tab.
RSA6100A Series Real-Time Spectrum Analyzers Help
283
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...
