Tektronix RSA6100A Series, Help Manual

Page: 105 / 415

General Signal Viewing > Frequency Vs Time Frequency Vs Time Settings
Item Display element Description
1
Top of graph adjustment Use the knob to adjust the frequency range displayed on the vertical axis.
2
Offset adjustment Adjusts the frequency shown at the center of the display.
3 Autoscale button
Adjusts the offset and range for both vertical and horizontal to provide the
best display.
4 Maximum and Minimum
frequency readouts Displays the maximum and minimum values, as well as when those values
occur.
5
Horizontal Scale Sets the time spanned by the graph.
6 Clear button Restarts Average trace.
7
Trace function Displays the current trace function setting (Settings > Trace > Function).
xxx
Changing Frequency vs Time Display Settings (see page 93)
Frequency Vs Time Settings
Menu Bar: Setup > Settings
Front Panel / Application Toolbar: Settings
The Setup settings for Frequency vs. Time are shown in the following table.
Settings tab Description
Freq & Span (see page 98) Sets the frequency and span parameters.
Trace (see page 99) Sets the trace display parameters.
Scale (see page 105) Sets the Vertical and Horizontal scale and offset parameters.
Prefs (see page 106) Speci fi es whether certain display elements are visible.
xxx
RSA6100A Series Real-Time Spectrum Analyzers Help
93