General Signal Viewing > DPX Spectrum
Traces Tab
2.
Type a name for the saved trace and click
Save
.
Show Recalled Trace
You can recall a previously saved trace for comparison to a live trace. First, specify a trace for recall and
second, enable Show Recalled Trace.
To select a trace for recall:
1.
Select the
...
button to display the Open dialog box.
2.
In the Open dialog, navigate to the location of the saved trace.
3.
Select the desired trace
fi
le.
4.
Select
OK
to complete your selection.
5.
Select the
Show recalled trace
check box.
6.
Verify that the trace’s
Show
check box is selected (either on this tab or next to the drop-down list
located at the top-left corner of the graph).
Traces Tab
The Traces Tab allows you to set the display characteristics of displayed traces in the DPX Spectrum
display. The Traces tab for the DPX Spectrum display has two versions. One for non-Bitmap traces
(described in this topic) and one for
the DPX Bitmap trace (see page 61)
RSA6100A Series Real-Time Spectrum Analyzers Help
63
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...
