Marker Measurements > Using Markers
Measuring Frequency and Power in the Spectrum
Display
Measuring Frequency and Power in the Spectrum Display
To measure the frequency and power at a point on a Spectrum trace:
1.
Select
Markers
>
De
fi
ne Markers
.
2.
Select the
Marker Properties
tab.
3.
Click
Add
. This displays a drop-down list under
MR
(Marker Reference), found inside the
Reference
box. The
fi
rst marker de
fi
ned is always designated the Marker Reference. Subsequently de
fi
ned
markers are designated as Delta Markers (you can also select and adjust markers by clicking on an
existing marker on a trace).
4.
From the drop-down list, select the trace to which you want to assign the marker.
5.
Click the close control panel button to remove the De
fi
ne Markers control panel.
6.
Click on the marker on the trace to activate that marker.
7.
Use the knob or the arrow keys on the front panel to move the marker to the desired location on the
trace. You can also click on the marker location text box in the Markers toolbar at the bottom of the
screen and adjust it with your mouse wheel. The Peak button in the Markers toolbar and the arrow
buttons to the right of it control marker peak searching on the trace.
8.
Read the frequency and power level of the marker position on the display.
9.
Read the signal density, frequency and power level of the marker position on the display.
284
RSA6100A Series Real-Time Spectrum Analyzers Help
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...
