Tektronix RSA6100A Series, Help Manual

Page: 235 / 415

Pulsed RF > Common Controls for Pulsed RF Displays Prefs Tab
Prefs Tab
The Prefs tab enables you to change parameters of the measurement display. The parameters available on
the Prefs tab vary depending on the selected display.
Settings on the Pulsed RF Displays Prefs Tab
The following table describes the settings that appear on the Prefs tab of the Pulsed RF displays: Pulse
Statistics and Pulse Trace. There is no Prefs tab for the Pulse Table display.
Setting Description
Show graticule Displays or hides the graticule in the trace display.
Show Marker readout in
graph When a marker is enabled, this setting displays or hides the maker readout, but not the maker
itself, on Time Trend plots.
Histogram readout
(present only when
Histogram is the selected
plot type) Controls the parameters Histogram readout and Bins. Histogram readout can be set to either
Count or %. Count indicates the number of hits that fell into each bin. % indicates percentage
of the total count (for the acquisition) that fell into each bin.
Bins Speci fi es how many "bins" or histogram bars the results are distributed into.
xxx
RSA6100A Series Real-Time Spectrum Analyzers Help
223