6-1
6. Speed Reference Command Configuration
The inverter offers users several choices to set the speed reference source. The most commonly used methods
are described in the next sections.
Frequency reference command is selected with parameter 00-05.
00-05: Main Frequency Command (Frequency Source)
This function sets the frequency command source.
Setting Range:
0 to 5
To set parameter 00-05:
- After power-up press the
DSP/FUN
key
- Select
00 Basic Fun
- Press
READ/ ENTER
key
- Select parameter -05
with the
UP/DOWN
▲ and ▼ keys and press the
READ/ ENTER
key.
In the parameter list move cursor to 00-05 with the
UP/DOWN
keys and press
READ/ ENTER
key to select.
00-05
Main Frequency Command Source Selection
Range
0:
Keypad
1:
External control (analog)
2:
Terminal UP / DOWN
3:
Communication control
4:
Pulse input
5:
PID
6.1 Reference from Keypad
Speed reference from the keypad is the default setting. Press the
READ/ ENTER
key first and use the </RESET,
▲ and ▼ keys to change the speed reference.
