Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 497 / 536

menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
- show this menu item
04
-
11
-
then press
save
04
-
11
-
1
-
01
then press
save
04
-
11
-
1
-
02
then press
save
04
-
11
-
1
-
03
then press
save
04
-
11
-
1
-
09
then press
save
04
-
11
-
then press
save
04
-
12
-
ds
-
01
{ds = DSS# 01~12}, then press
save
04
-
12
-
ds
-
02
{ds = DSS# 01~12}, then press
save
DSS ALLOCATION back next show
DSS UNIT # :_ bksp show chg
DSS OWNER :NULL back next chg TRUNK ROUTE 2:N back next chg
z z z
TRUNK ROUTE 8:N back next chg
LOUD BELL back next show
LOUDBELL ID :_ bksp show chg
APPLICATION:L.B. back next chg TRUNK ROUTE 1:N back next chg DIR NUMBER :NULL back next chg
Loud Bell Control: The ICE system provides one relay contact that is used
to operate ancillary devices (typically a bell).
Loud Bell Control - ID: Only 1 Loud Bell control contact is available in
this system platform, therefore this entry is always "1".
Loud Bell Control - Application: The application can be assigned as:
L.B. (Loud Bell) for signaling system users that a trunk call is
ringing. This can be especially useful in noisy environments.
Music Source 1 - control contact. (Can be used to activate
message on hold devices connected to Music Source 1.)
Music Source 2 - control contact. (Can be used to activate
message on hold devices connected to Music Source 2.)
8
External Pager control. (Can be used to activate external paging
equipment when that resource has been selected by a user.)
Loud Bell Control - Trunk Route: When the LBC contact is
assigned for Loud Bell Control, the contact will open and close at ringing cadence for the Trunk Routes selected here. (Range: [1~8] Y/N; Default: [1~8] "N")
DSS Allocation: Up to 12 DSS Consoles can be assigned for operation
with any ICE digital extension.
DSS Allocation - DSS Owner: This is the extension for which the
DSS Console being programmed will operate. (Range: 401~464; Default: NULL)
DSS Allocation - DSS Directory Number: This is the physical port
address to which the DSS Console is connected. (Range: 401~464; Default: NULL)