Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual, Page: 332 / 536

Emerald ICE Installation, Programming & Maintenance Manual
11-3
Phone
Extension
App
lication
Pr
ogramming
(07)
11
RMP Programming
1. Access the RMP using the procedures described in Section 3.3 .
2. Select RP, C.O. Line Application, Trunk Route Settings from the toolbar to
display the following window.
3. Using the drop ‐ down list in the CO Route: field, select a CO Route to
program.
4. Using the drop ‐ down lists in the Alt. Route 1: and Alt. Route 2: fields,
select alternate route numbers as necessary. A Trunk Route can be assigned
an Alternate Trunk Route for use if all trunks in this route are busy when a
user places a call. This selection programs the number of the Trunk Route
that shouuld be used of this trunk route is busy. Available selections are
00 ‐ 08.
5. Using the drop ‐ down lists in the Delete Digits fields for Alt. Route 1: and
Alt. Route 2:. select leading digits to be deleted to modify the number
dialed for the appropriate digits necessary to place this call on a trunk in
the Alternate Trunk Route. E.g. If the local (1FB) trunks in the selected
trunk route are all busy when a call is placed that required the digit 1 as
the first dialed digit, you might allow this call to overflow to the VoIP
trunk route where 1 is not needed. In this case enter 1 in this data item.
Available selections are 00 ‐ 08.
1 indicates that ONE digit - starting with the first digit should be deleted. If "2"
were entered into this data item, the first two digits of those the user dialed
would be deleted/removed.