Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual, Page: 252 / 536

Emerald ICE Installation, Programming & Maintenance Manual
7-71
Phone
Cal
l
Ha
nd
ling
Pr
ogramming
(03)
7
5. Press the softkey beneath
next
to advance to pulse dialing
INTER_DGT
TIME
. This is the system timing, in milliseconds of the time between digit
dialing signals. (Dial Pulse and DTMF modes use this timer) Press the
softkey beneath
chg
to select the
INTER_DGT TIME
.
6. Press the softkey beneath
next
to advance to
TONE TIME
.
7. Press the softkey beneath
chg
to select the appropriate
TONE TIME
(this
time is also used for DTMF inter ‐ digit timing). This is the system timing, in
milliseconds of duration of Tone (DTMF) signal generated by the system
for each DTMF digit.
8. Press the Volume button (
v
) to return to the DB Item Selection
Screen or exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, Call Handling, Timing to display the RP: Call
Handling ‐ Timing (Part 1) window. Press the More button to display
following: