Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 281 / 536

8-20
Emerald ICE Installation, Programming & Maintenance Manual
Phone
System
Resour
ce
Handling
(0
4)
8
5. Click on the Apply Button to apply the assignment. The
Extension/User Name/Passwords will appear in the Extension Display
area.
6. Click on the Close button to close the window without making changes or
click on the Update button and follow the prompts to save the database
changes.
Description
At some point there may be a need to control other devices using the telephone
system. The Emerald ICE system provides one dry contact closure (standard) for
interface of these devices. The contact closure is rated at 24VDC, 1Amp. The
Contact Closure can be assigned to operate in three different ways:
Loud Bell:
If the system is installed in a high noise environment, there may be
a need to use a loud or high ‐ gain ringing device. This allows control of an
optional, collateral loud ‐ ringing device. The device is connected to the contact
as a trigger. When the ringing occurs on CO Lines or in CO Line Groups
designated as Loud Bell CO Line Groups, the contact closure operates and
controls the connected collateral device.
External Page:
The contact may also be programmed to control External
Paging equipment. When programmed in this way, the contact closure
operates whenever the External Paging Port is activated.
Music Source:
The contact may also be programmed to control Message ‐ On ‐
Hold devices. In this way, the contact closes whenever CO lines are placed on
Hold. This function can reduce wear on electromechanical devices that
provide the message on hold function.
Default Settings:
Loud Bell = L.B. (Loud Bell). (Range is: L.B., MS1, MS2, EP.)
Loud Bell – CO Line Group – 1 ‐ 8 = N. (Range is Y/N.)
8.9
Loud Bell / External Page / Music Source – Control