Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 141 / 536

5-52
Emerald ICE Installation, Programming & Maintenance Manual
Phone
Extension
Pr
ogramming
(01)
5
vi. Press the Hold button (
h
) to return to the previous menu level
or press the Volume button (
v
)to return to the DB Item
Selection Screen or exit programming.
o. Enter
06-02
‐ Tenant Group ‐
03
(VM Table – Disconnect Digit, where
1 ‐ 3 = Tenant Group) and press the softkey beneath
save
.
i. Press the softkey beneath
chg
.
ii. Enter the digits required to force disconnect of the active port.
iii. Press the softkey beneath
save
.
iv. Press the softkey beneath
next
to continue programming the
various call handling digits (Prefix/Suffix).
v. Press the Hold button (
h
) to return to the previous menu level
or press the Volume button to return to the DB Item Selection
Screen or exit programming.
p. Enter
03-34-01
(VM Dialing Ratio – Tone Time) and press the
softkey beneath
save
. This advances to
VM DIALING RATIO
–
TONE
TIME
programming screen.
i. Press the softkey beneath
chg
until the appropriate Tone Time
displays. Times can be
60
,
90
,
120
or
150
milliseconds. Tone
time is the minimum duration of DTMF tones delivered to the
voicemail analog port for voice processor call processing.
ii. Press the softkey beneath
next
to program Inter ‐ Digit Time. Or…
iii. Press the Hold button (
h
) to return to the previous menu level
or press the Volume button (
v
) to return to the DB Item
Selection Screen or exit programming.
q. Enter
03-34-02
(VM Dialing Ratio – Inter ‐ Digit Time) and press the
softkey beneath
save
. This advances to
VM DIALING RATIO
–
INTER-DIGIT TIME
programming screen.
i. Press the softkey beneath
chg
until the appropriate Inter ‐ Digit
Time displays. Times can be
60
,
90
,
120
or
150
milliseconds.
Inter ‐ Digit Time is the minimum duration of time between tones
delivered to the voicemail analog port for voice processor call
processing.
ii. Press the Hold button (
h
)to return to the previous menu level
or press the Volume button (
v
)to return to the DB Item
Selection Screen or exit programming.