Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 480 / 536

menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
-
show
this
menu
item
03
-
17
then press
save
03
-
18
then press
save
03
-
19
then press
save
03
-
20
then press
save
03
-
21
then press
save
03
-
22
then press
save
03
-
23
then press
save
03
-
24
then press
save
03
-
25
then press
save
DIAL WAIT TIME:0 back next chg DIAL DELAY : 100 back next chg CAMP ON TIME :20 back next chg ALARM PLAY : 30 back next chg HOTEL ENABLE :N back next chg SYS SPD. CHECK:N back next chg TSI CONNECT :Y back next chg CONF TONE :Y back next chg CALL DURATION:10 back next chg
Dial Wait Time: This is a Service Provider Compensation item. When older CO's are slow to place a DTMF receiver
on the circuit the first digit(s) dialed may be missed. This timer determines how long the ICE will wait after a trunk is accessed before digits are output on the circuit. (Time is in seconds.)
Dial Delay Time: This is a Service Provider Compensation item. When older CO's are slow to place a DTMF receiver
on the circuit the first digit(s) dialed may be missed. This item is similar to the above except that it deploys a tone detecto
r
to
listen
for dial tone. When dial tone is detected the timer starts, digits are sent at the end of the timer and after dial tone
is detected. (Time is in milliseconds.)
Camp On Time: When an extension has called a busy extension and invokes the Camp On feature - Camp On Tone
is heard at the called (busy) extension. This tone is repeated at the called extension at intervals associated to this timer. Time is in seconds.)
Alarm Play: This timer is used with the Extension Alarm feature. When an extension has invoked Reminder
(
p92
) at his extension, the alarm will sound at his extension for the duration of this timer. (Time in seconds.)
Hotel Enable: This activates the hotel features of the ICE system. This allows the attendant extension to set the
Room Status, Extension COS, and Reminder for all extensions in the same tenant group.
System Speed Check: This is a Yes/No setting that can be used to bypass toll restriction for numbers stored in
System Speed Dial. (Y=Yes, check the toll restriction.)
TSI (Toll Service Interface) Connect: This is a Service Provider feature
handshake
function. When toll calls are
placed, the destination CO sends a signal back to the originating CO to advise the connection is complete. The ICE can receive this signal and begin SMDR call logging for the call at that time.
Will the ICE system provide a tone to alert all those in a conference that the conference is established? And when
others join in onto the existing conference?
Call Duration: A call must be of this minimum call duration before it is considered an actual call that will be logged in
the SMDR output.