Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 233 / 536

7-52
Emerald ICE Installation, Programming & Maintenance Manual
Phone
Cal
l
Ha
nd
ling
Pr
ogramming
(03)
7
Description
Flash – PBX Line is a programmed setting that will determine what flash timing
will be presented to the host telephone system when the Emerald ICE is installed as
a subordinate system. This feature is critical to perform accurate host ‐ system
functions like PBX call transfer. When used “behind” a PBX, the
Emerald ICE
system extensions should have the Flash feature code programmed onto a
Feature/DSS Button for easy access.
The Flash code may be stored in any speed dial location.
The Flash code may be stored in the Last Number Redial buffer. When you
activate redial, a Deluxe Telephone display will show a “
/
” to indicate the Flash
code.
The Flash time is programmable from 100ms to 1500ms in increments of 100ms
(1/10th of a second).
At a Deluxe Telephone, when the flash code is dialed
PBX Flash
will be
displayed temporarily.
Single line extensions must generate a hook ‐ flash on the analog port, then dial
!
3
to generate a hookflash on a PBX Line.
Default Settings:
PBX Flash Time is set at 0.6. (Range is: 0.1 ‐ 3.0 seconds.)
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in Section
3.2.
2. Enter
03-03
, then press the softkey beneath
save
. This advances to the
PBX Flash
programming screen.
3. Press the softkey beneath
chg
to select a PBX Flash Time value that
determines what flash timing will be presented to the host telephone
system when the Emerald ICE is installed as a subordinate system.
Available selections are
100-1500
in increments of 100 milliseconds.
3. Press the Volume button (
v
) to return to the DB Item Selection
Screen or exit programming.
7.16
Flash – PBX Line