Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 250 / 536

Emerald ICE Installation, Programming & Maintenance Manual
7-69
Phone
Cal
l
Ha
nd
ling
Pr
ogramming
(03)
7
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, Call Handling,Timing to display the RP:
Calling Handling: Timing (Part 1) window. Click on the More button to
display the following:
3. Using the drop ‐ down list in the SLT Hook Flash ‐ Start: field, select a Start
range setting, in milliseconds. This timer indicates the minimum time that
an analog/SLT must flash the hook ‐ switch to be considered a valid
flash ‐ hook request. A hook ‐ flash that is shorter than this timer is
considered a mistake; no action is taken. Available selections are 60,
100 ‐ 1400 milliseconds.
4. Using the drop ‐ down list in the STL Hook Flash ‐ End: field, select an End
range setting, in milliseconds. This timer indicates the Maximum time that
an analog/SLT must flash the hook ‐ switch to be considered a valid
flash ‐ hook request. A hook ‐ flash that is longer than this timer is
considered an On ‐ Hook {hang up} request. Available selections are
100 ‐ 1400 milliseconds.
5. Click on the
Close
button to close the window without making changes or
click on the Update button and follow the prompts to save the database
changes.