Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual, Page: 533 / 536

menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
show
this
menu
item
08
-
15
-
then press
save
08
-
15
-
t
-
{t = tenant# 1,2,3}, then press
save
08
-
15
-
t
-
01
{t = tenant# 1,2,3}, then press
save
08
-
15
-
t
-
dy
{t = tenant# 1,2,3; dy = day 02~08}, then press
save
08
-
15
-
t
-
dy
01
{t = tenant# 1,2,3; dy = day 02~08}, then press
save
08
-
15
-
t
-
dy
02
{t = tenant# 1,2,3; dy = day 02~08}, then press
save
08
-
15
-
t
-
dy
03
{t = tenant# 1,2,3; dy = day 02~08}, then press
save
08
-
15
-
t
-
dy
04
{t = tenant# 1,2,3; dy = day 02~08}, then press
save
z z z
z z z
08
-
15
-
t
-
dy
{t = tenant# 1,2,3; dy = day 02~08}, then press
save
TIME SWITCHING back next show
SHOW TENANT :_ bksp show chg
NITE START:00:00 back next chg NITE END :00:00 back next chg
SATURDAY back next show FOLLOW TENANT1:Y back next chg SUNDAY back next show
NOON START:00:00 back next chg NOON END :00:00 back next chg
System Application - Time Switching: Used to set the automatic
Service Mode function of the ICE system. At preselected times during each day of the week, the ICE system can be set to switch the Service Mode whereby changes in ringing assignments/operations take effect.
Time Switching can be set uniquely for each tenant group. In
Time Mode the Service Mode of the ICE system is assumed as Day Mode until Time Mode settings invoke another mode.
Enter
"00:00" if no Service Mode change is desired. See the example.
Time Switching - Follow Tenant 1: this data item is for
tenant group 2 & 3 programming. When this data item is set to "Y", the programming in the Tenant Group 1 table are used.
Time Switching - Sunday~Saturday - Noon Start: this data
item is where to input the time of day (for the day selected) when the ICE system will switch out of the current mode (Day Mode) into Noon Mode. Noon Mode is available only when the VAA Board is equipped.
Time Switching - Sunday~Saturday - Noon End: this data
item is where to input the end of Noon Mode. Day Mode is then activated.
Time Switching - Sunday~Saturday - Night Start: this data
item is where to input the time of day (for the day selected) when the ICE system will switch out of the current mode (Day Mode) into Night Mode.
Time Switching - Sunday~Saturday - Night End: this data
item is where to input the end of Night Mode. Day Mode is then activated.
NOTE:
the end of Night Mode may be the following
morning (9am) even if it is programmed on the previous day. If so, input that time (09:00). Since the internal clock will not reach 9am until the next morning, that is when the change will occur.