Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 515 / 536

menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
show
this
menu
item
07
-
01
-
rt
-
04
{rt = route# 01~08}, then press
save
07
-
02
-
then press
save
07
-
02
-
01
then press
save
07
-
02
-
02
then press
save
07
-
02
-
03
then press
save
07
-
02
-
04
then press
save
TRUNK 717 :NONE back next chg TRUNK 723 :NONE back next chg
DIR # SWAP 9 back next show
SWAP WITH :_ bksp save chg
FAX DETECTION back next show
TRUNK 705 :NONE back next chg TRUNK 711 :NONE back next chg
Trunk Applications - Trunk Route - Directory Swapping: This programming allows
the directory number of the selected trunk route to be swapped with another.
Trunk Applications - Trunk Route - Directory Swapping - Swap With: Enter the trunk
directory number that this trunk route directory number should be swapped with (E.g. 87) NOTE: a trunk route with an existing (programmed) trunk route directory number must be programmed for swapping to occur.
Trunk Applications - FAX Detection: The first circuit of each CO Line interface
board has FAX Tone (CNG) detection circuitry equipped on the board. If this data item is programmed the ICE system will
answer
the call before ringing begins at extensions.
During the FAX Tone Detection Timer (as programmed in Call Handling) the system will monitor the circuit for CNG Tone. If detected the call will be transferred to the destination programmed here (SLT/analog extension). If no tone is detected, the call will follow Answering Position ringing programming. (Range: 401~464; Default: NONE)