Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 484 / 536

menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
-
show
this
menu
item
03
-
38
then press
save
03
-
39
then press
save
03
-
40
then press
save
03
-
41
then press
save
03
-
42
then press
save
03
-
43
then press
save
03
-
44
then press
save
TALK ABANDN: 600 back next chg CONF. TALK_T: 0 back next chg HOLD ABANDN: 600 back next chg SLT HF TO HOLD:0 back next chg UNSPV CONF_T: 0 back next chg PRESET FWD_T :10 back next chg RING RECOG.: 100 back next chg
Conference Talk Time: Determines the maximum conference call duration when an internal (ICE
system) extension is involved in the conference. (Range: 0, 10, 20, ...120 minutes {0 = indefinite time}; Default: 0)
Unsupervised Conference Talk Time: Determines the maximum conference call duration when
an internal (ICE system) extension is NOT involved in the conference. (Range: 0, 10, 20, ...120 minutes {0 = indefinite time}; Default: 0)
Preset Forward Time: his system-wide timer determines how long a call will ring before the call is
routed to the Preprogrammed Call Forward Destination (Range: 6, 8, 10, ...30 seconds; Default: 10)
Ring Recognition Time: This system-wide timer determines the minimum ring signal detection
time for all analog trunks. This compensation timer allows the programmer to adjust this time when CO Line conditions are less than optimum and for certain CO Line features (Distinctive Ringing). (Range: 50~1500 milliseconds; Default: 100)
Talk Abandon timer: This system-wide timer determines how long a Polarity Reversal signal or
interruption in Loop Current must be present before the Emerald ICE system reports the condition to the Central Processor. This will cause a call in progress to disconnect. (Range: 50~1000 milliseconds; Default: 600)
Hold Abandon timer: This system-wide timer determines how long a Polarity Reversal signal or
interruption in Loop Current must be present before the Emerald ICE system reports the condition to the Central Processor. This will cause a call on HOLD to disconnect. (Range: 50~1000 milliseconds; Default: 600)
Single Line Telephone - Hook-Flash to Hold timer: This system-wide timer determines the
amount for time that a SLT must remain on-hook to be considered a disconnect. (Range: 0~5; Default: 0)