Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual, Page: 518 / 536

menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
show
this
menu
item
08
-
03
then press
save
08
-
04
then press
save
08
-
05
then press
save
08
-
06
then press
save
08
-
07
-
then press
save
08
-
07
-
c
-
{c = cabinet# 1,2}, then press
save
08
-
07
-
c
-
b
-
pp
{c = cabinet# 1,2; b = board# 1~6; pp = port# 01~12}, then press
save
08
-
07
-
c
-
b
-
pp
{c = cabinet# 1,2; b = board# 1~6; pp = port# 01~12}, then press
save
08
-
07
-
c
-
b
-
pp
{c = cabinet# 1,2; b = board# 1~6; pp = port# 01~12}, then press
save
08
-
08
-
then press
save
DIR NUMBER :_ bksp show chg
POSITION TO DIR back next show
z z z
HOUR MODE :12 back next chg AUTO LOG-OFF :20 back next chg LOG-ON AGAIN :30 back next chg TEST TIME :NULL back next chg
SHOW CABINET :_ bksp show chg
SHOW BOARD :_ bksp show chg
1-01-01 :401 bksp show chg 1-01-02 :402 bksp show chg 1-01-12 :412 bksp show chg
DIR TO POSITION back next show
System Application - Hour Mode: Select 12 or 24 hour mode.
Note: no "AM" or "PM" is displayed in 12 hour mode. (Range: 12, 24; Default: 12)
System Application - Auto Log-off: When the programmer has
forgotten to exit the database administration mode (exit programming) A
uto Log-off will perform this function automatically. (Range: 10, 20,
...60; Default: 20)
System Application - Log-on Again: This security data item
prohibits access to database administration (programming) when there have been three unsuccessful attempts to enter database administration. The wrong password entered. When the wrong password is entered three times, this is the amount of time that will lapse before the ICE system will allow successful access. An entry of "0" disables this function. (Range: 0, 10, 20, ...60; Default: 30)
System Application - Test Time: The ICE system performs
diagnostic tests that can detect some system errors, these errors can then be retrieved remotely, sent automatically to a remote service center, and/or displayed at the system assigned attendant extension. The test time is entered in 24-hour format; hhmm (hh=00~23, mm=00~59) (Range: 00:00~23:59; Default: NULL (none))
System Application - Position to Directory: This data item allows
the programmer to change the directory number assigned to a system physical port. Select the cabinet, board and port to be changed and then change the directory number as required. Note: only directory numbers asssigned in the Numbering Plan that match the port function can be used.
System Application - Directory to Position: Use this data item to
display (only) the physical location (equipment) of a directory number.