Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual, Page: 530 / 536

menu tree
_ bksp save chg
Code Sequences
(listed at the left side of
every page/data item).
Use:
v
to return to the Code Sequence entry screen
h
to step back one menu level.
back
- previous item this menu level
next
- next item this menu level
show
show
this
menu
item
08
-
11
-
then press
save
08
-
11
-
01
then press
save
08
-
11
-
02
then press
save
08
-
12
-
then press
save
08
-
12
-
01
then press
save
08
-
12
-
02
then press
save
TRUNK COPY back next show
INDIVIDUAL COPY back next show
COPY FROM :_ bksp save chg COPY TO :_ bksp save chg
GROUP COPY back next show
COPY FROM :_ bksp save chg COPY TO :_ bksp save chg
EXTENSION COPY back next show
INDIVIDUAL COPY back next show
COPY FROM :_ bksp save chg COPY TO :_ bksp save chg
GROUP COPY back next show
COPY FROM :_ bksp save chg COPY TO :_ bksp save chg
System Application - Trunk Copy & Extension Copy: These are convenience
functions that make programming operations much faster. These copy functions allow the programmer to use one trunk or extension as a template and copy its programming to other trunks or extensions. Copy functions are possible one-by- one or by groups. Note: In the Extension Copy function all data is copied from the template extension to the destination extension EXCEPT for Flexible Feature button data. This data can be copied using the Feature Key Copy function.
When copying either Trunks or Extensions data; you must select a source -
this becomes the template. So all data must be programmed for that template first. When ready:
4
When prompted to "Copy From", input the template
(source) directory number. If its a trunk, the range is 700~757; if its an extension, the range is 401~472.
4
When
Individual Copy
was selected and prompted
to "Copy To", input the destination directory number. If its a trunk, the range is 700~757; if its an extension, the range is 401~472. When
save
is
pressed, the "Copy To" prompt returns for the next destination to be input. Use
h
to back out of this
function.
4
When
Group Copy
was selected and prompted to
"Copy To", input the destination Group directory number. If its a trunk, the range is 9 (only one group at default); if its an extension, the range is 260~267. When
save
is pressed, the "Copy To" prompt
returns for the next destination to be input. Use
h
to back out of this function.