Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 190 / 536

Emerald ICE Installation, Programming & Maintenance Manual
7-9
Phone
Cal
l
Ha
nd
ling
Pr
ogramming
(03)
7
Default Settings:
No CO Lines are set for automated attendant operation.
The Answer Position is set to Extension “401” for DAY, ALT and EVE modes.
Ring Time to Answer is set at “0” seconds.
No Answer Time is set at “20” seconds.
Drop No digits Dialed is set to “No.”
XFR Mode set to RBT (Ring Back Tone).
Waiting Code set to “#.”
Inquiry Code set to “*.”
DISA Code set to “9.”
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in Section
3.2.
2. Enter
03-48
and press the softkey beneath
save
. This advances to the
AUTO ATTENDANT
programming screen.
3. Press the softkey beneath
save
and then press the softkey beneath
show
.
RING_T TO ANS
displays.
4. Press the softkey beneath
chg
to change the
RING_T TO ANS
. This
timer sets the amount of time that a caller will hear ring ‐ back before the
line is answered by the auto attendant. The new answer delay time can be
from 0 ‐ 20 seconds
5. Press the softkey beneath
save
.
6. Press the softkey beneath
next
.
RING NO ANS
displays.
7. To change the
RING NO ANS
timer press the softkey beneath
chg
. This
timer sets the amount of time that a call rings the auto attendant before
being routed to the designated Answer Position in the event that all Auto
Attendant ports are in use and unavailable to handle the call. Each time
the the softkey beneath
chg
is pressed the value is updated to the next
valid time interval. Valid times are 10 ‐ 90 seconds in 10 second increments.
8. Press the softkey beneath
next
.
DROP NO EX #
displays.
9. To change the
DROP NO EXT #
operation toggle the softkey beneath
chg
for
Y/N
. When set to
Y
, the caller will be automatically dropped by
the system if they do not make a selection or dial a valid extension