Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 209 / 536

7-28
Emerald ICE Installation, Programming & Maintenance Manual
Phone
Cal
l
Ha
nd
ling
Pr
ogramming
(03)
7
20. Press the Volume button (
v
) to return to the DB Item Selection
Screen or exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, Call Handling, CID Proramming Code from the menu bar to
display the following window.
3. In the Inter. Prefix Code: field, enter an International Prefix code of any 4
digits.
4. In the Country Code: field, enter a Country Code of any 4 digits.
5. In the
Long Distance Prefix Code:
field, enter a long distance prefix of any
1 digit.
Local Area Code programming:
Local Area Code Programming requires two entries:
• The local area code
• The same code if it is required for dialing back calls from that area code.
For example, for local calls from area code 480 that must be dialed with that area
code whenever this number is called back:
• “480” must be programmed as a Local Area code so that the callback opera ‐
tion will not preface the number with the long distance code (typically “1”).
• “480” must be programmed as the Area Prefix for Local Area Code “480” so
that the digits “480” are dialed whenever this local number is called back.