Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 297 / 536

8-36
Emerald ICE Installation, Programming & Maintenance Manual
Phone
System
Resour
ce
Handling
(0
4)
8
28. Enter the new telephone number with special characters as required.
Pause = PGM + 70
Flash = PGM + 3
Speed Numbering Programming=PGM+1 + next speed number (600 ‐ 699).
29. Press the softkey beneath
save
. The speed dial number and the new
contents are displayed.
30. Press the softkey beneath
next]
and enter the next speed dial number to
change and follow the conventions above.
Or...
31. Press the Hold button (
h
) to exit this programming and return to the
previous menu level.
Then…
32. Press the Volume button (
v
) to return to the DB Item Selection
Screen or exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3 .
2. From the toolbar select RP, SPD. No. Assignment and Programming to
display the following:
System SPD
Sytem SPD
Extension SPD
Apply Button
Apply Button
Assignment