Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual, Page: 218 / 536

Emerald ICE Installation, Programming & Maintenance Manual
7-37
Phone
Cal
l
Ha
nd
ling
Pr
ogramming
(03)
7
Each of the calls involved in a holding conference will be placed on Exclusive
Hold.
When the controlling party exits a conference, the most recently invited internal
party will be designated as the new controlling party.
When a conference is established, each party will hear a burst of conference tone
when the Conference Tone is enabled.
The Unsupervised Conference feature code
PGM
p77
may be programmed
on any available programmable Feature/DSS button.
Only the Controller of an Unsupervised Conference may rejoin an Unsupervised
Conference.
Conference can only be established at a Deluxe Telephone.
Default Settings
Call Handling – CO Line Conference = 3 CO Lines. (Range is None/2/3.)
Call Handling – Unsupervised Talk Time = 0 (unlimited). (Range is 0 ‐ 120 in
10 ‐ minute increments.)
Call Handling – Conference Tone = Y. (Range is Y/N.)
CO Line – Call Abandon = Y. (Range is Y/N.)
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in Section
3.2.
Program the maximum number of CO Lines that may be in a conference:
2. Enter
03-01
and press the softkey beneath
save
. This advances to the
TRUNK CONF.
programming screen.
3. Press the softkey beneath
chg
until the appropriate value displays
(
NO
/
2LNS
/
3LNS
). These are the number of CO lines that will be allowed
in a conference.
4. Press the Volume button (
v
) to return to the DB Item Select Screen.
Program the Unsupervised Conference Time:
5. Enter
03-38
and press the softkey beneath
save
. This advances to the
CONF. TALK_T
programming screen.
6. Press the softkey beneath
chg
to select the Unsupervised Conference
Time. Available selections are
0-120
minutes in increments of 10 minutes.
7. Press the Volume button (
v
) to return to the DB Item Select Screen.