Tadiran Telecom EMERALD ICE, Installation & Maintenance Manual

Page: 121 / 536

5-32
Emerald ICE Installation, Programming & Maintenance Manual
Phone
Extension
Pr
ogramming
(01)
5
Description
This feature allows the system administration to track all incoming and outgoing
CO line traffic, chronologically by extension number. Account code data is output
for each call record when entered to place a call. SMDR is output from the
standard “SMDR” RS232 serial port located on the CCB board. An external serial
printer or call accounting device may be connected for permanent record keeping
or call cost accounting. Each data record is output within the standard 80 ‐ character
frame. Data communications is one direction only through the SMDR port and is
programmable for data rate (baud rate) in database programming.
Default Settings:
Extension – SMDR Output is set to “
Y
” (yes). (Range is Y/N.)
Call Handling – SMDR Call Output – Outgoing Call is set to “Y.” (Range is Y/N.)
Call Handling – SMDR Call Output – Incoming Call is set to “N.” (Range is Y/N.)
Call Handling – SMDR Call Output – Account Code is set to “Y.” (Range is Y/N.)
System Resource – Modem & Serial Port – CIL X_Rate is set to “9600.” (Range is
1200/2400…19200.)
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in
Section 3.2 .
Program an extension for SMDR Output:
2. Enter
01-
Extension No.
-19
, then press the softkey beneath
save
. This
advances to the
SMDR OUTPUT
programming screen for the extension
selected.
3. Toggle the softkey beneath
chg
for
Y/N
.
Y
will enable SMDR output for
the selected extension.
4. Press the Volume button (
v
) and repeat steps 2 through 4 for other
extensions.
To program the SMDR Call Output – Outgoing Call:
5. Enter
03-31-01
, then press the softkey beneath
save
. This advances to
the
OUTGOING CALLS
programming screens for SMDR Output selection
5.14
Station Message Detail Recording (SMDR)