Installation and Maintenance Manual
System Configuration
Installation and Maintenance Manual v4/0615/10
79
Please note that the PCS 50 obtains the time from the DHCP Server.
PCS 50 as a partner
to a User’s ha
ndset on a Windows PC
The PCS 50 can be run as partner to any PCS 58x, 57x, 56x, 55x or analogue handset being used on the
maximiser system giving the user the additional functionality provided by the PCS 50.
The PCS 50 software uses the same method as the PCS 60 to partner an analogue handset as described
from page 70.
Please note that the PCS 50 software is stored as PCS.exe in the Installation folder, eg C:\Program
Files\SpliceCom\PCS50, or can be access via the short cut created during the installation
Installing the PCS 50 software on a Mac OS X
1
The set up file will be supplied in a compressed folder called, for example, PCS50.2.2.667.pkg.zip.
Open this folder.
2
Run (double click) the set up file called PCS50
3
At the Welcome screen select Continue
4
At the Select a Destination screen select the Volume where you want the software to be loaded
5
By default the software will be loaded into the Applications folder. Change this location if required.
6
Select Continue when ready
7
At the Standard Install screen select Install. (If you wish at this point to change the Install Location
select Change Install Location.)
8
You will be prompted for your PC log in password, enter this in the Password field.
9
The software will be installed
10
At the Installation Completed screen select Close
PCS 50 as IP Soft phone on a Mac OS X
The PCS 50 software can be run as an IP soft phone where the PC becomes the User’s telephon
e and the
voice path will be via the PC. Therefore the PC will require a headset, microphone, sound card etc
installed.
The PCS 50 will use the same method as the PCS 60 to register with the system as detailed from page 73.
