![Splicecom 4100 Installation & Maintenance Manual Download Page 80](http://html.mh-extra.com/html/splicecom/4100/4100_installation-and-maintenance-manual_1349029080.webp)
Installation and Maintenance Manual
System Configuration
76
Installation and Maintenance Manual v4/0615/10
6
Select Update or Apply when ready.
Run the PCS 60 as a partner
1
Run the PCS60 software either from Applications or create an Alias to this file in the required
location and double click on the Alias. (Please note that if you do not wish the PCS 60 to be loaded
initially as an IP soft phone disconnect the PC from the network or turn off Auto Add Phones.)
2
The PCS 60 application will open.
3
From the PCS60 menu select Preferences
4
In the IP Address field enter the IP address
of the Call Server or Phone Module or IP
Phone as described above, eg
192.168.0.249
5
In the Port field enter the port number that the analogue phone is connected to, as described
above, or 5001 for an IP phone.
6
In the Partner Login Code field enter the phone’s Partner Login Code configured abo
ve.Tab to the
next field
7
Close the window when ready
8
Close down the PCS 60.
9
At this point your PC will need a network connection to the maximiser system.
10
Run the PCS 60 again.
11
Once a connection has been made the name of User assigned to the port that the PCS 60 is
partnering is displayed in the Status Bar at the bottom left hand corner.
12
Lift the handset on the telephone to confirm that the connection between the PCS 60 and the
phone is set up correctly. A call entry will be displayed in Call Status.