Splicecom 4100 Installation & Maintenance Manual Download Page 37

Page: 37 / 374

Installation and Maintenance Manual

System Configuration

Installation and Maintenance Manual v4/0615/10

Network Configuration Type

–

this section can be used to give the I208/I230 a static IP address (or

return the module to using DHCP). Select Static and then enter the IP address, subnet mask and

default gateway address required.
VPN Configuration

–

this section can be used to enter the VPN server settings for the module.

Other Configuration

–

use this section to set the

Gatekeeper - the IP address of the S8000/S716/5100/5108/NSG that you want the module to

Alt Gatekeeper

–

the IP address of the S8000/S716/5100/5108/NSG that you want the module to

TFTP, NFS, and DNS settings

–

these are typically the S8000/S716/5100/5108/NSG that the

I208/I230 is connected to.

Other settings

–

for entering additional application Startup Arguments.

When ready select the Save Settings button. You will receive a message indicating that a reboot is

required.

Select OK

The Reboot Unit button will now be available at the bottom right, click on this button.

Summary of Contents for 4100























































































































































































































































































































































































Search results

Summary of Contents for 4100

Reviews:

Brands by name

Popular brands

Splicecom 4100, Installation & Maintenance Manual

Search results

Summary of Contents for 4100

Reviews:

Brands by name

Popular brands