Splicecom 4100 Installation & Maintenance Manual Download Page 151

Page: 151 / 374

Installation and Maintenance Manual

Configuring system functionality

Installation and Maintenance Manual v4/0615/10

147

The remaining fields within a Department configuration form are covered in the rest of this section or

within the relevant section of this manual.
Alternatively, a Department can be created via Manager Assist>Configuration Aids>Departments - Add

New Department.

If invalid characters or a duplicate name or extension number are entered a warning will be displayed

until the entry is changed.
The Current Home field will contain a default entry, if this is not the Call Server required select the correct

one from the list. This is a required field.
Use the Save Department button with the Messaging page to save and create the new Department.

Multiple Departments can be created together via Manager Assist>Configuration Aids>

Departments - Add Bulk Departments.

Each Department is identified on the database by a GUID (Global Unique Identifier). This unique

identifier can be displayed within Manager Assist by selecting Configuration Aids and then Voicemail

GUIDs.

An overview of the Departments created on the system can be viewed via Manager Assist>Configuation

Aids>Department Overview. Each Department Name has a link to its MA configuration pages and the

Department can be amended here if required.

Summary of Contents for 4100























































































































































































































































































































































































Search results

Summary of Contents for 4100

Reviews:

Related manuals for 4100

Brands by name

Popular brands

Splicecom 4100, Installation & Maintenance Manual

Search results

Summary of Contents for 4100

Reviews:

Related manuals for 4100

Brands by name

Popular brands