![background image](http://html1.mh-extra.com/html/smc-networks/lecsc-series/lecsc-series_operation-manual_1299642024.webp)
-22-
5.3 Parameter Settings
(Driver side)
The setup software (MR Configurator2
TM
:LEC-MRC2E)
is necessary for setting the parameter.
*1 Setup software version 1.52E or above is required.
*2 The setup software (MR Configurator2
TM
:LEC-MRC2E) must be purchased as an additional item.
*3 The USB cable (LEC-MR-J3USB) must be purchased as an additional item.
①
From the “Parameter” menu select “Parameter Setting”, the “parameter setting” window will open.
②
The explanation of the
parameter item is displayed in “MR2 Help”.
(When it is not displayed, from the
“View” menu select “Docking window” – “Docking Help”.)
③
When each item of “List display” is clicked, “Parameter list” screen along each item is displayed.
When “Basic” is selected, it is displayed as follows.
Refer to"LECSC
Operation Manual”,
chapter 6 for details of each parameter.
①
②
③