![background image](http://html1.mh-extra.com/html/smc-networks/lecsc-series/lecsc-series_operation-manual_1299642017.webp)
-15-
3.3 Wiring of PLC and driver
Connect the PLC and the driver.
(1)Wiring of PLC and driver
Connect the programmable driver CC-Link master unit station and the driver by a twisted cable (3-wire
type).
Programmable controller
CC-Link unit
CC-Link Ver.1.10-compliant cable
(2) Wiring of connector
The pin layout of the communication connector CN1 on the driver unit is shown below.
DA
DG
DB
SLD
FG
Servo amplifier
CN1
CN1
The driver and programmable driver CC-Link master unit are wired as shown below. Re
fer to “LECSC
Operation Manual”,section 13.4 (3) for the CC-Link Ver.1.10-compliant cable used for connection.
Servo amplifier
SLD
FG
DA
DG
SLD
DB
CN1
FG
DG
DA
DB
Programmable controller
CC-Link master unit
Driver
Driver
CN1 of Mitsubishi Electric System & Service Co., Ltd.
Product number : K05A50230600