SMC Networks LECSC Series Operation Manual Download Page 23

Page: 23 / 125

-21-

5.2.4 Driver ON LINE Check

Check that the driver is enabled (ONLINE).

Check that the “ONLINE/OFFLINE” icon is displayed “ ”.

It is OFFLINE when displ

ayed as “ ”.

* For OFFLine, PC and amplifier

aren’t communicating. Confirm the following points.

- Is amplifier's power supply turning on?

- Are PC and amplifier connected with the USB cable?

Is the USB driver installed?

- Is the USB driver which is compliant to Windows version installed?

Is the setting of “Port” for USB connection corresponding?

Please to match the value of parameter [PC20] and the station.
Please select the station

“00”, if you want to use for the first time.

Please select the option unit

“No Connection”.

5.2.5 Help Function

By selecting “MR Configurator2 Help” in “Help” from any window of the setup software, a “HELP” screen will be
shown.

Summary of Contents for LECSC Series






























































































































Search results

Summary of Contents for LECSC Series

Reviews:

Related manuals for LECSC Series

Brands by name

Popular brands

SMC Networks LECSC Series, Operation Manual

Search results

Summary of Contents for LECSC Series

Reviews:

Related manuals for LECSC Series

Brands by name

Popular brands