![background image](http://html1.mh-extra.com/html/smc-networks/lecsc-series/lecsc-series_operation-manual_1299642042.webp)
-40-
5.5.2 Initial I/O Signal Allocation
The initial (Default) allocation of I/O signals is shown below.
See
“LECSC Operation Manual”, section 3.5.2 and “LECSC Operation Manual”,section 4.5 for details regarding
signals.
See “LECSC Operation Manual”,section 6.4 for parameter configuration values.
* Pins CN6-1
– CN6-4 (input signals) and CN6-14 – CN6-16 (output signals) can be allocated as current Sink
(NPN) interface and current Source (PNP) interface wiring and I/O signal allocation.
5.5.3 Signal Allocation using Setup Software
①
The “Parameter Setting” window will be displayed when “parameter list” is selected from the “parameters”
menu in the setup software.
②
Click the I/O tab.
③
When changing the allocation of signals, parameters for “PD06” - “PD11” can be altered.
PD06 to PD08 Input signal assignment (CN6-2 to CN6-4)
PD09 to PD11 Output signal assignment (CN6-14 to CN6-16)
②
③
Input signal points (4): (position control mode) and initial assignment
Output signal points (3) (position control mode) and initial assignment