![background image](http://html1.mh-extra.com/html/smc-networks/lecsc-series/lecsc-series_operation-manual_1299642069.webp)
-67-
(2) Trigger
“Trigger” is a condition which decides the display timing of the graph.
If trigger conditions are not satisfied, waveform will not be displayed.
①
Click “
“ of [Data] to set the condition.
(In general, set the Motor speed.)
(3)
“Level” / “Condition” / “Position” are displayed.
①
Click
“ “ of “Level” / “Condition” to set the condition.
For Motor speed, when the operation direction is positive,
“Level” should be100 and when the
operation direction is negative,
“Level” should be -100.
Align the setting of
“Condition” to the operation direction too.
“Level” / “Condition” setting
(
For Motor speed
)
Operating direction
“Level”
[r/min]
“Condition”
Positive direction operation
100
Startup
Negative direction operation
-100
Fall
“Position” should be 10%.
①
②