-110-
8. Positioning operation method of operation
The operation method changes depending on the input device, parameter and point table setting.
The flow of the operation method that changes depending on the device and parameter setting status is shown in the
chart for your reference.
MR-J3-T occupied
station count setting
switch SW1
Remote register-based
point table No. setting
auxiliary function invalid
OFF
ON
2 stations
occupied
Parameter No.PA30
Remote register-based
position data setting/point
table No. (speed) setting
auxiliary function invalid
Remote register-based
position data/speed data
setting auxiliary function
invalid
Remote input-based point
table No. setting auxiliary
function valid
(Refer to section 5.4)
1 station
occupied
OFF OFF
Servo amplifier
MR-J3-T
OFF ON
(Refer to section 3.2.5)
Remote input position/speed
specifying system selection
(RY(n+2)A)
0
1
2
Driver
LECSC
□
EC
Remote
input-based
point
table No. setting auxiliary
function valid
(Refer to "LECSC Operation
Manual", section 5.4)
LECSC
□
-
□
occupied
Station count setting
