![background image](http://html1.mh-extra.com/html/smc-networks/lecsc-series/lecsc-series_operation-manual_1299642091.webp)
-89-
Signal name
Description
Device No
1 station
occupied
2 stations
occupied
Trouble
(ALM)
A trouble is assigned to the CN6-15 pin as an external output signal.
RX(n 1)A or RX(n 3)A (ALM) turns ON when the protective circuit is
activated to shut off the base circuit.
When no alarm has occurred, RX(n 1)A or RX(n 3)A (ALM) turns OFF
within about 1.5s after power is switched ON.
RX(n 1)A
RX(n 3)A
Remote station
communication ready
(CRD)
This signal turns ON at power-on and turns off at a trouble occurrence or in
the reset (RY(n 1)A or RY(n 3)A) (RES) ON status.
RX(n 1)B
RX(n 3)B
6.5.3 Detailed explanation of Remote registers input
The signal whose Remote Register field has an oblique line cannot be used.
Input (Programmable PC or PLC...etc
Driver)
Remote register
Signal name
Description
Setting range
1 station
occupied
2 stations
occupied
RWwn
RWwn
Monitor 1
Demands the status indication data of the driver.
1) When 1 station is occupied
Setting the monitor code of the status indication item to be
monitored to RWwn and turning RYn8 to ON sets data to
RWrn. RXn8 turns on at the same time.
2) When 2 stations are occupied
Setting the monitor code of the status indication item to be
monitored to RWwn and turning RYn8 to ON sets data to
RWrn. RXn8 turns on at the same time.
When demanding 32-bit data, specifying the lower 16-bit
code No. and turning RYn8 to ON sets the lower 16-bit
data to RWwn and the upper 16-bit data to RWrn. Data is
stored in the RXn8. RXn8 turns on at the same time.
Refer to "
LECSC Operation Manual”, section 3.5.3,
"LECSC Operation Manual (Simplified Edition)
”, section
6.6 for the item of the monitor code of the status
indication.
Refer to "LECSC
Operation Manual”,
section 3.5.3
Refer to "LECSC
Operation Manual
(Simplified Edition)
”,
section 6.6
RWwn 1
RWwn 1
Monitor 2
Demands the status indication data of the driver.
1) When 1 station is occupied
Setting the monitor code of the status indication item to be
monitored to RWwn 1 and turning RYn8 to ON sets data
to RWrn 1. RXn8 turns on at the same time.
2) When 2 stations are occupied
Setting the monitor code of the status indication item to be
monitored to RWwn 1 and turning RYn8 to ON sets data
to RWrn 5. RXn8 turns on at the same time.
When demanding 32-bit data, specifying the lower 16-bit
code No. and turning RYn8 to ON sets the lower 16-bit
data to RWwn 5 and the upper 16-bit data to RWrn 6.
Data is stored in the RXn8. RXn8 turns on at the same
time.
Refer to "LECSC Opera
tion Manual”, section 3.5.3,
"LECSC Operation Manual (Simplified Edition)
”, section
6.6 for the item of the monitor code of the status
indication.
Refer to "LECSC
Operation Manual”,
section 3.5.3
Refer to "LECSC
Operation Manual
(Simplified Edition)
”,
section 6.6