-51-
5.7 Positioning (Point Table) Operation using the Setup Software
This feature is only available in positioning (point table) mode.
When positioning using the positioning (point table) mode, the point table (target position, speed data, acceleration
time, deceleration time etc.) must be configured.
(There are 31 points of point tables to be used when 1 station is occupied and 255 points when 2 stations are
occupied.)
5.7.1 Point table List
①
Using the “Positioning Data” menu in the setup software.The “Point table list” can be opened by selecting
“Point Table”
②
“Read”
：
point table data will be read from the LECSC and displayed.
③
“Write All”
：
point table data will be written to the LECSC.
①
②
③
