Siemens Sitrans LR200, Quick Start Manual, Page: 20 / 276

7ML19985XC81 SITRANS LR200 (HART) – QUICK START MANUAL Page EN-19
m
mmmm
Englis
h
c) Press RIGHT arrow to open Edit mode or DOWN arrow to accept default
values and move directly to the next item.
d) To change a setting, scroll to the desired item or key in a new value.
e) After modifying a value, press RIGHT arrow to accept it and press DOWN arrow
to move to the next item.
f) Quick Start settings take effect only after you select Yes to Apply changes in
step 1.7.
1.1. Material
1.2. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Use a setting just faster than the maximum filling or emptying rate (whichever is greater).
1.3. Sensor Units
Selects the units for the Quick Start variables (high and
low calibration point, and level, distance, or space).
1.4. Operation
Options
LIQUID
LIQUID LOW DK (low dielectric liquid)
Options
SLOW 0.1 m/minute
MED 1.0 m/minute
FAST 10.0 m/minute
Operation
types
NO
SERVICE
The SITRANS LR200 stops updating measurements and associ-
ated loop current. Last valid measurement is displayed.
LEVEL
Distance to material surface referenced from Low Calibration
Point (process empty level).
SPACE
Distance to material surface referenced from High Calibration
Point (process full level).
DISTANCE
Distance to material surface referenced from Sensor Reference
Point.
Options
M, CM, MM, FT, IN
high cal.
point
low cal.
point
level
space
distance
sensor
reference
point