Siemens Sitrans LR200, Quick Start Manual, Page: 19 / 276

Page EN-18 SITRANS LR200 (HART) – QUICK START MANUAL 7ML19985XC81
mmmmm
English
c) Press RIGHT arrow again to open Edit mode. The
current value is highlighted.
d) Key in a new value, and press RIGHT arrow to accept
it.
The LCD returns to parameter view and displays the new
selection.
Key functions in Edit mode
Quick Start Wizard via the handheld programmer
1. Quick Start
a) Point the programmer at the display (from a maximum distance of 300 mm [1 ft.]),
then press RIGHT arrow
to activate PROGRAM mode and open menu level 1.
b) Press RIGHT arrow twice to navigate to menu item 1.1 and open parameter
view.
Key Name Function
UP or
DOWN
arrow
Selecting
options
• Scrolls to item.
Numeric
editing
• Increments or decrements digits
• Toggles plus/minus sign
RIGHT arrow
Selecting
options
• Accepts the data (writes the parameter)
• Changes from Edit to Navigation mode
Numeric
editing
• Moves cursor one space to the right
• or with cursor on Enter sign, accepts the data and changes
from Edit to Navigation mode
LEFT arrow
Selecting
options
• Cancels Edit mode without changing the parameter
Numeric
editing
• Moves cursor to plus/minus sign if this is the first key
pressed
• or moves cursor one space to the left.
Clear
Numeric
editing
• Erases the display.
Decimal
point
Numeric
editing
• Enters a decimal point.
Plus/minus
sign
Numeric
editing
• Changes the sign of the entered value.
to
Numeral
Numeric
editing
• Enters the corresponding character.
Note: Each time the Quick Start Wizard is initiated, the start-up settings are factory defaults.
The Wizard will not recall previous user-defined settings.
M 20.00
+20.00
LOW CALIB.
1.5