Siemens SITRANS FUS1020, Manual, Page: 64 / 251

3-9
1020NFM-1D Section 3
z
Using a flat blade screwdriver or 5/16” nutdriver, mount the Reference Mounting Track on pipe.
Install straps but do not tighten at this time (Figure 2).
IMPORTANT: Make sure Reference
Index Screws on mounting tracks are facing toward each other.
z
Rotate the mounting track to the previously selected location on the pipe and fully tighten the
securing straps.
z
Place a straight edge firmly on mounting track assembly (Figure 3). Draw a line out from the end
of the track. This line will be used to align the second mounting track assembly to the Reference
Mounting Track.
z
Install second mounting track assembly keeping securing straps loose (Figure 4). Rotate the
second assembly until its nearest corner aligns with the Reference Mounting Track and the line
drawn in the previous step.
Figure 2
Reference
Mounting Track
Assembly in
9 o’clock position
Strap Screw
Mounting Straps
Reference Index
Screw (located under
mounting strap)
Figure 3
Figure 4
Line
Corner
Second
Mounting
Track
Reference
Mounting
Track