Siemens SITRANS FUS1020, Manual, Page: 176 / 251

6-54
1020NFM-1D Section 6
6.10.1 PREFERRED UNITS
The selection you make in this menu cell becomes the default units for all menu items and data out-
puts. You can choose either English or metric units. The factory setting is English.
To specify metric default units for all meter functions:
To access the [Preferred Units] option list press the <Right Arrow>.
Move the cursor to [Metric] by pressing the <Up/Down Arrow>.
To register your selection press <ENTER>.
6.10.2 THE TABLE SETUPS MENU
The [Table Setups] menu cell allows you to pre-condition your pipe table and transducer types.
The edits made in [Table Setups] become the default settings for creating a new site. Transducers
“marked” in the [Transducer Types] menu will be preferentially selected when the meter recommends
transducers during the automatic Pick/Install Transducer routine.
To access the [Table Setups] menu press the <Right Arrow>.
Pipe Table
The factory-programmed pipe table describes over sixty standard English and metric pipes. The table
can save you programming steps by loading all required data at once from option list selection. The
Pipe Table configuration is [PIPE CLASS
Ä
PIPE NAME].
Pipe Class presents a list of standard metric and English Pipe classifications. Selecting a class (e.g.,
ASA Carbon Steel) conditions the [Pipe Name] option list to all the stored pipes within that class (see
Pipe Data Menu Structure on next page). Selecting a pipe by its name (e.g., 2SS10) loads a descrip-
tion of that pipe in the remaining menu cells. Note that liner data is not provided. If your pipe is lined,
then you will be required to enter the liner material and its thickness manually.
To access the [Pipe Table] menu press the <Right Arrow>.
To access the [Ceate/Edit Pipe] menu press the <Right Arrow>.
Table Setups Pipe Table
Transducer Type
Ö Ú
Siemens 2 Channel SITE 1
Choose Pipe Name 1SS10
Outer Diameter (in) 1.315
Wall Thickness 0.109
Liner Material None
Liner Thickness 0.000
Choose Pipe Class ASA Stainless Steel
Create/Edit Pipe
Pick the Pipe Spec & Material Category