Siemens SITRANS FUS1020, Manual, Page: 43 / 251

2-24
1020NFM-1D Section 2
2.8.3 ENTERING NUMERIC DATA
When a menu cell requires a numeric answer, press the <Right Arrow> to access a number entry field.
Note that an equal sign (=) appears before the current entry. You can now use the number keys and the
decimal point key to type a new value. If applicable, you can use <+/-> keys to change the mathemati-
cal sign of the number. Press <ENTER> to store the numeric data.
For example, to set the Span Data use the <Down Arrow> to scroll down the Clamp-On menu and
highlight [Data Span/Set/Cal].
Siemens Channel [1] SITE1
Data Span, Set and Calibrate control
Clamp-on
Channel Setup
Pipe Data
Application Data
Pick/Install Xdcr
Flow
Operation Adjust
Flow/Total Units
Data Span/Set/Cal
Datalogger Setup
Multiple Select Option Lists
Certain option lists allow you to make more than one selection. For instance, the Datalogger Data
option list allows you to select any or all of the available data items for your reports. You can use the
<Up and Down Arrows> to move the cursor through the list. If you press <ENTER> to select an item,
a plus sign (+) appears next to that item. The cursor remains so that you can make other selections. To
deselect a previously selected item, move cursor next to that item and press <CLR>. Use the <Left
Arrow> to leave any multiple select option list.
Datalogger Mode +Site Id
Datalogger Data +Date
Log Time Interval +Time
Datalogger Events Flow
Display Datalogger Average Flow
Raw Flow
Total
Vs
Valc
Aeration
Alarms
DeltaT (usecs)
Datalogger Setup
Siemens Channel [1] SITE1
Select Datalogger Data