manualshive.com logo in svg

Siemens SITRANS FUS1020, Manual, Page: 185 / 251

Share
Download
Siemens SITRANS FUS1020 Manual Download Page 185

6-63

1020NFM-1D

Section 6

also have to type the period (.) separator between each set of digits. For example, you would enter ten
minutes after two o’clock in the afternoon by typing: 14.10.00 You can use the <Right Arrow> to move
the cursor back to a number if you need to re-type it. Press the <Up/Down Arrow> key to remove the
current setting.

To set the clock:

To enable numeric entry press the <Right Arrow>.

Use PC numeric keys or KeyPad to enter the time (HH.MM).

To store the time press <ENTER>. This moves the cursor to [RS-232 Setup] menu cell.

6.10.8  RS-232 SETUP

Use the [RS-232 Setup] menu cell to set the operating parameters of the serial I/O port. Settings
include baud rate, parity, data bits, line feed, network ID number and waiting period before a RTS time-
out. Only activate the RS-232 output if you intend to transmit serial data. This will avoid burdening the
system with unnecessary data transferals while it is performing flow computations.

NOTE: The RS-232 stop bit implementation is fixed. If you are using a communication program

such as Windows 3.xx Terminal or Windows (95/98/NT/2000/XP) HyperTerminal, that
includes a field for stop bits, select 1 stop bit.

Baud Rate

The [Baud Rate] menu cell sets the asynchronous serial transmission data transfer rate of the RS-232
port. It provides a selection of standard baud rates up to 38,400 baud. The selected baud rate must
match the baud rate setting of the receiving external device. The factory-set baud rate is 9600.

RS-232 Setup

Baud Rate

300
1200
2400
4800
9600
38400

Parity

Mark
Odd
Space
Even
None

Data Bits

7
8

Line Feed

No
Yes

Network ID

xx 

(numeric entry)

RTS Key Time

0.0
0.2 Sec.
0.4 Sec.
0.6 Sec.
0.8 Sec.
1.0 Sec.
2.0 Sec.
3.0 Sec
4.0 Sec.

Ú

Ö

Ú

Ö

Ú

Ú

Ö

Ú

Ö

Ú

Ö

Ö

Ú

Ú

Ö

Ú

Ú

Ú

RS-232 SETUP MENU STRUCTURE

Summary of Contents for SITRANS FUS1020




























































































































































































































































Reviews:

No comments