manualshive.com logo in svg

Siemens SITRANS FUS1020, Manual, Page: 194 / 251

Share
Download
Siemens SITRANS FUS1020 Manual Download Page 194

7-5

1020NFM-1D

Section 7

7.3

THE APPLICATION INFO MENU

This menu provides a live display of the basic timing data used by the meter during operation.

7.4

THE LIQUID DATA MENU

This menu shows the current Reynolds number used by the meter to implement flow profile compen-
sation.

To activate AnCal:

Move the cursor to the [AnCal] menu cell by pressing the <Up/Down Arrow>.

Press the <Right Arrow> to enable numeric entry. Note that an equal sign (=) appears before the
number.

Enter the desired flow rate using current rate units (e.g., 120.00 GPM). Note that the [Flow]
menu cell now reflects the artificial rate.

Move the cursor away from the menu cell by pressing the <Up/Down Arrow> to turn [AnCal] off.

TN uSec

  75.193

TL uSec

  44.009

DeltaT

       126

Burst/Sec

       256

% Accepted
Last  Makeup

             (Re)Start

Makeup Status

   Measurement

Siemens      2 Channel   [1]    Channel 1

Time between transit and receive

Application Info

APPLICATION INFO MENU ITEMS

TN uSec

The total elapsed time between the transmission and reception of a sonic pulse.

TL uSec

The total time a sonic pulse takes to travel through the liquid.

DeltaT nSec

This is the instantaneous result of subtracting the down from the up transit
times.

NOTE: This will appear to be more active than dampened flow readings

.

Burst/Sec

Number of transmissions per second under current operating conditions. The
following factors influence this parameter: aeration, pressure transients, signal
strength variation.

% Accepted

Running tally of accepted and rejected up/down burst sets.

 Last Makeup

Reason for last Makeup (signal reacquisition).

Makeup Status

Current stage of Makeup routine. [Measurement = normal operation]

Summary of Contents for SITRANS FUS1020




























































































































































































































































Reviews:

No comments