Siemens SITRANS FUS1020, Manual, Page: 44 / 251

2-25
1020NFM-1D
Section 2
Siemens Channel [1] SITE1
Set 100% <20 mA> flow rate
Span Data
Max Flow GAL/MIN 1846
Min Flow GAL/MIN 0.00
Max Vs m/s 0.00
Min Vs m/s 0.00
z
Press the <Right Arrow> and [Span Data] is highlighted.
z
Press the <Right Arrow> again and [Max Flow GAL/MIN] will appear. To change the [Max Flow GAL/
MIN] data, press the <Right Arrow> and an equal sign appears. Using the number keys, enter the
new data (e.g., 1846). Press the <ENTER> key to store the numeric data.
Siemens Channel [1] SITE1
Set 100% <20 mA> flow rate
Span Data
Max Flow GAL/MIN =0.00
Min Flow GAL/MIN 0.00
Max Vs m/s 0.00
Min Vs m/s 0.00
2.9 HOW TO SET UP A CHANNEL FOR TRANSIT-TIME OPERATION
This section shows how to set up a single-channel for a transit-time, clamp-on operation and how to
create a new site setup, enter pipe data and then select a liquid class (which tailors the meter re-
sponse to the liquid’s density and viscosity). It explains how to select a clamp-on transducer model,
pick a mounting mode and, after physically mounting the transducers on the pipe, invoke the [Install
Transducer] procedure. This setup is the fastest way to get the meter operational. It accepts most
defaults and only provides a data output on the local LCD display panel. The first step is to create a
new site setup.
NOTE: Always begin a new installation by issuing the [Create/Name Site] command. This ac-
tion prepares the flow computer for site programming by loading system defaults into
the appropriate menu cells.
2.9.1 HOW TO ACCESS THE CHANNEL SETUP MENU AND CREATE A SITE
As shown is previously, when you access the Installation Menu, you will arrive at the top menu location
[Meter Type]. With single-channel meters, all you have to do is press the <Right Arrow> twice to
access the main section of the Clamp-On Menu (see next page).
Siemens Channel [1] SITE1
Span 0% and 100% Values for Analog Data
Data Span/Set/Cal
Span Data
Set Alarm Levels
Calibrate Flow Rate
Chan Not Setup
Reynold’s Table Standard