Siemens SITRANS FUS1020, Manual, Page: 157 / 251

6-35
1020NFM-1D
Section 6
6.6.1 FLOW VOLUME UNITS
The [Flow Volume Units] option list allows you to select the rate units the meter uses to report volumet-
ric or mass flow. If you select mass units, the meter uses the specific gravity parameter (see Applica-
tion Class section) to convert volumetric flow to mass flow. The default [English Units] is [Gallons
<US>].
To select a Volumetric or Mass Unit:
To access the [Flow Volume Units] option list press the <Right Arrow>.
To move the cursor to the required units press the <Up/Down Arrows>.
To store selection press <ENTER>.
6.6.2 FLOW TIME UNITS
The [Flow Time Units] option list allows you to select a flow display time base. The system default is
[Minutes]. If this suits the application, press the <Down Arrow> to bypass this menu cell.
To select Flow Time Units:
To select the desired time unit press the <Right Arrow> to access the [Flow Time Units]
option list.
To move the cursor to the required time units press the <Up/Down Arrows>.
To store the time units press <ENTER>.
Flow Volume Units Gallons <US>
Flow Time Units MIN
Flow Display Range Autorange
Flow Display Scale GAL/MIN
Total Volume Units Gallons <US>
Totalizer Scale
KGAL
Total Resolution 00000x00
Totalizer Mode
NETFLOW
Batch/Sample Total 0.000
Reset Totalizer
Yes/No
Siemens 2 Channel [1] FLOW1
Choose desired Flow rate volume units
Flow/Total Units
Use this menu cell to enter a
volume accumulation for the
batching or sampling totalizer
relay trigger.
Use these menu cells
to set the scaling for the
flow rate and flow total
outputs.
Use this menu cell to
select how the totalizer
accumulates flow.
Use this menu cell to set the
resolution of the totalizer
.
Use this menu cell to select
either volumetric or mass flow
total units
.
Use this menu cell to select a
range for the flow rate display
screen
.
Use this menu cell to select a
time base for the flow rate
units.
Use this menu cell to select
either volumetric or mass flow
rate units
.