manualshive.com logo in svg

Siemens SITRANS FUS1020, Manual, Page: 124 / 251

Share
Download
Siemens SITRANS FUS1020 Manual Download Page 124

                 

6-2

1020NFM-1D

Section 6

6.1

THE CHANNEL SETUP MENU

This menu is available after picking a meter type and a measurement technology. Use this menu to
manage site setups. You can create, recall, delete and save entire site setups. You can apply Site
Security, which permits read-only access to the Installation Menu unless you enter a password. The
Channel Enable switch allows you to disable and enable a measurement channel. 

Be aware that site

name option lists only show sites that are consistent with the currently selected meter type.

6.1.1 HOW TO RECALL A SITE SETUP

The [Recall Site Setup] command allows you to reinstall the system at a former site. For an original
installation, see [Create/Name Site] for instructions on how to create a new Site Setup. This menu cell
provides a list of saved site names. Scrolling to a site name and pressing <ENTER> moves all the
parameters associated with that name into Active Memory.

If there are no site setups present in site storage memory, the menu cell reports [No Sites] in the right-
hand column. Saving a site setup with a site name adds the name to this option list.

Siemens                  2 Channel   [1]                 XYZ

Recall Site Setup

XYZ

Channel Enable

Yes

Create/Name Site

1

Site Security

Off

  Flow

Delete Site Setup

1

Save/Rename Site

1

Scroll saved Site Setup list and Enter

Channel Setup

Use this menu cell to free up site storage
memory by deleting obsolete site setups.
Note that the cell retains the name of the
most recently created site setup [XYZ].
This option list expands as you save more
sites.

Use this menu cell at any time

to manually save the site data.

Note that attempting to leave

the menu after entering/editing

any site data triggers a Save

Site pop-up window

automatically.

This cell shows that
site setup [XYZ] is
stored in memory,
and can be recalled.
This option list
expands as you save
more sites.

Use this menu cell to
enable or disable Site
Security. Provide a
password to enable.
Re-enter the
password to disable.

This shows that
the site setup
[XYZ] is the active
site.

Use this menu cell to create and

name a site setup. Note that the

cell retains the name of the

most recently created site setup

[XYZ].

This shows that
the Meter Type is
Dual Channel,
operating with
Channel 1 active.

Channel Setup

Recall Site Setup

*Site Name

Channel Enable

Yes

No

Create/Name Site

*Site Name Entry/Edit

Site Security

Off

On

Delete Site Setup

Site Name List

Save/Rename Site

Site Name Entry/Edit

Ö

Ú

Ö

Ú

Ú

Ö

Ö
Ö

Ö

Ö

CHANNEL SETUP MENU STRUCTURE

Summary of Contents for SITRANS FUS1020




























































































































































































































































Reviews:

No comments