Siemens SITRANS FUS1020, Manual, Page: 199 / 251

7-10
1020NFM-1D Section 7
7.6 THE TEST FACILITIES MENU
The Test Facilities menu provides commands for system analysis and recovery. The most useful for
the end-user is [Makeup] command. Using these routines under the supervision of our technical sup-
port staff will help us to provide technical analysis and solutions.
Makeup
The Test Facility Makeup routine allows you to command the meter to re-acquire the operating param-
eters established during the Initial Makeup routine invoked by the [Install Completed?] command (see
paragraph 6.4 Pick/Install Xdcr).
To invoke the Makeup routine:
Press <Up/Down Arrow> to scroll the cursor to [Makeup].
Press the <Right Arrow> to access the test option list. Press <Up/Down Arrow> to move the
cursor to [Yes].
Press <ENTER> to start the makeup routine.
To start a Test Routine:
To scroll the cursor to the test routine press the <Up/Down Arrow>.
To access the test option list press the <Right Arrow>. Press <Up/Down Arrow> to move the
asterisk to [Yes].
To start the routine press <ENTER>.
To end the routine press the <Left Arrow>.
Makeup No
Tx Up No
Tx Dn No
Fixed ALC No
Tx Up Fixed ALC No
Tx Dn Fixed ALC No
Siemens 2 Channel [1] Channel 1
Right arrow invokes an InProcess Makeup
Test Facilities
Makeup Commands the meter to re-acquire the receive signal.
Tx Up Forces upstream transmission only.*
Tx Dn Forces downstream transmission only.*
Fixed ALC Select “Yes” to command amplifier to hold a constant gain.*
TX Up Fixed ALC Fixed ALC while transmitting up only.*
TX Dn Fixed ALC Fixed ALC while transmitting down only.*
* For technical service diagnostics.
TEST FACILITIES COMMANDS